Lime Renders and Plasters

Baumit offers outstanding products for rendered facades, plastering and screeds with consistent top quality that builders can rely on. Incorporating the benefits of lime, with the ease of use of cement products, Buamit products are modern and effective.

Baumit is ISO 9001 certification and European Technical Approval (ETA) demonstrate its firm commitment to quality.

All Baumit systems and products are noted for their simplicity - they are truly modern lime products, offering excellent reliability, at the best price-performance ratio.

NBT's range of Baumit products is warrantied for use with Pavatex systems, Thermoplan Systems and masonry / renovation systems. NBT employs a technical expert to co-ordinate training, information about and site support for the use of these products.

Some of the world's best known buildings have used Baumit products. You can see this for yourself at the Schönbrunn Palace in Vienna, the Reichstag building in Berlin, the Doge's Palace in Venice, the Kremlin in Moscow and the Neuschwanstein Castle in Bavaria.

Please take this as a basic introduction: for specifying, please check with NBT first. Please note that Baumit Lime products are not only for Thermoplan or Pavatex systems; they are suitable wherever a Lime product has been specified.

External Basecoats:

• Masonry: MP69: onto all masonry including Thermoplan but not cast concrete. LL66: onto all masonry except cast concrete and highly insulated Thermoplan
• MC55W: onto cast concrete, paintwork (where solid) and building repairs. Requires testing of non standard, variable or loose backgrounds (mesh pull off test). Also may well require mesh in basecoat.
• LS62: plinth render

Internal Plasters:

• Lime options are RK 39 or RK70. RK 39 can only go onto dense masonry (concrete blocks and brick). RK 70 is the lime equivalent of MC55W so good for cast concrete, paintwork, and building repairs.
• RK70 can also be used as a lime plinth render.

Onto Pavatex Diffutherm Systems:

• Diffutherm: MC55W on Diffutherm boards, with mesh in inner layer
• HM50 on XPS boards below plinth External Topcoats:

Render Top-Coats (on all Baumit base coats and substrates except where noted):

• SEP: 200 colours available but needs equalization paint; comes in bags
  •  SEP01 (grain size 1mm);
  • SEP02 (grain size 2mm)
  • SEP03 (grain size 3mm)
  • SEP04 (grain size 4mm)
• KWP: 200 colours available but needs equalization paint, grain size 5mm
• KRP: scrape render, 10 colours available, no equalization paint finish required
• Silikonputz: Grain size 1.5 or 2 or 3mm, needs no equalization paint finish and is more durable than mineral topcoats. Good for exposed areas (coastline) and higher impact resistance (schools). Available as well in “artline” colours; comes in tub
• EFP 007: Grain size 0.7mm. Very smooth finish. Not for Diffutherm and not for exposed areas (grain is too small)

Onecoat render:

• Monocouche single coat: Scrape render available in 10 colours, no equalization paint finish required

Please contact NBT for more information and specialist advise.